Be a Maker
SHIROKU.NET
  • Profile
  • Profile

Control Motor on Mbed NXP LPC1768

Robotics
2018.09.29 2018.09.22

Environment

  • Host PC: Ubuntu 16.04
  • Device: mbed NXP LPC1768
  • MOSFET: N-CH 60V 7A TO220

Code

mbedLearning/SimpleMotor at master · shirokunet/mbedLearning

Result

Robotics
LPC1768 Mbed
shiroku
SHIROKU.NET

Related Posts

Robotics

Setup J120-IMU for Jetson TX2

As you know, official JetPack doesn't support for J120-IMU. In fact, could not use USB port when I attached Jetson TX2 t...
Robotics

Disassembly Logitech C930e

Before
Robotics

Draw Real Time Chart Using Epoch on Raspberry Pi

Environment Ubuntu 16.04 Python 3.6.2 Flask 0.12 D3.js v3.5.17 Epoch 0.8.4 gevent-websocket 0.10.1 ...
Robotics

3pi Robot Santa Fe Trail Problem

Environment Ubuntu 16.04 Pololu 3pi Robot (ATmega328P)
Robotics

Experiment the Conversion Time of the ADC on Mbed NXP LPC1768

Environment Host PC: Ubuntu 16.04 Device: mbed NXP LPC1768
Robotics

Write MPU9250 Calibration Data to Flash Memory on Mbed NXP LPC1768

Environment Host PC: Ubuntu 18.04 Device: mbed NXP LPC1768
Control LED Using Button on Mbed NXP LPC1768
Using 4 Segment LED Display on Mbed NXP LPC1768
Home
Robotics

Profile

ReyesTatsuru Shiroku
Robotics Engineer
Tokyo, Japan

Details

SNS

Follow Reyes

Popular Posts

  • Install Qt Creator on Jetson TX2
  • Run CGI program on Raspberry Pi as WEB Server
  • Record the screen of the JetsonTX2
  • Install Jupyter Notebook on Jetson TX2
  • ベンチャーを始めるあなたへ、何度でも挑戦を続けるために。大企業へ転職した私が伝えたいこと。
  • Run WebRTC Native Client Momo on Raspberry Pi 3B
  • YOLO v3 with Onboard Camera on Jetson TX2
  • Connect CSI Camera on Jetson TX2 to ROS

Archives

  • December 2019
  • June 2019
  • April 2019
  • January 2019
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • May 2018
  • April 2018
  • March 2018
  • February 2018
  • January 2018
  • October 2017

Category

  • Business
  • Diary
  • EnglishStudy
  • Robotics

Tags

RaspberryPI Mbed Python JetsonTX2 LPC1768 IzanagiDrive 3pi Robot AVR MPU9250 FPGA ZYBOZ7 Vivado OpenCV Flask Ubuntu16.04 J120-IMU CGI CSI Camera Jupyter Notebook Tensorflow I2C LCD Ultrasonic ROS PID DonkeyCar D3.js Epoch MQTT VisualStudio FSM NUCLEO F446RE Momo FreeRTOS PYNQ-Z2 ADC MOSFET Servo Eclipse Polycarbonate LULZBOT TAZ6 3D Printer Fusion 360 Logitech IMU9250 RTIMULib CAN PyCrypto SQLite C++ RobotContest YOLO Record Qt C930e WebRTC
SHIROKU.NET
© 2017 SHIROKU.NET.
    • Profile
  • Home
  • Top

  • Profile

    ReyesTatsuru Shiroku
    Robotics Engineer
    Tokyo, Japan

    Details

    SNS

    Follow Reyes

    Popular Posts

    • Install Qt Creator on Jetson TX2
    • Run CGI program on Raspberry Pi as WEB Server
    • Record the screen of the JetsonTX2
    • Install Jupyter Notebook on Jetson TX2
    • ベンチャーを始めるあなたへ、何度でも挑戦を続けるために。大企業へ転職した私が伝えたいこと。
    • Run WebRTC Native Client Momo on Raspberry Pi 3B
    • YOLO v3 with Onboard Camera on Jetson TX2
    • Connect CSI Camera on Jetson TX2 to ROS

    Archives

    • December 2019
    • June 2019
    • April 2019
    • January 2019
    • October 2018
    • September 2018
    • August 2018
    • July 2018
    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • October 2017

    Category

    • Business
    • Diary
    • EnglishStudy
    • Robotics

    Tags

    RaspberryPI Mbed Python JetsonTX2 LPC1768 IzanagiDrive 3pi Robot AVR MPU9250 FPGA ZYBOZ7 Vivado OpenCV Flask Ubuntu16.04 J120-IMU CGI CSI Camera Jupyter Notebook Tensorflow I2C LCD Ultrasonic ROS PID DonkeyCar D3.js Epoch MQTT VisualStudio FSM NUCLEO F446RE Momo FreeRTOS PYNQ-Z2 ADC MOSFET Servo Eclipse Polycarbonate LULZBOT TAZ6 3D Printer Fusion 360 Logitech IMU9250 RTIMULib CAN PyCrypto SQLite C++ RobotContest YOLO Record Qt C930e WebRTC