Be a Maker
SHIROKU.NET
  • Profile
  • Profile

Control LED Using Button on Mbed NXP LPC1768

Robotics
2018.09.22

Environment

  • Host PC: Ubuntu 16.04
  • Device: mbed NXP LPC1768

Code

mbedLearning/SwitchLED at master · shirokunet/mbedLearning

Result

Robotics
LPC1768 Mbed
shiroku
SHIROKU.NET

Related Posts

Robotics

Write MPU9250 Calibration Data to Flash Memory on Mbed NXP LPC1768

Environment Host PC: Ubuntu 18.04 Device: mbed NXP LPC1768
Robotics

Setup Pololu 3pi Robot

Taking "Introduction to Robotics" at UCSC Extension in this quarter. The teacher who is Thomas P Poliquin recommended me...
Robotics

Install OpenCV on Jetson TX2

This is my memo to setup OpenCV on Jetson TX2. Environment Jetson TX2 Ubuntu 16.04 JetPack 3.2.1 OpenCV...
Robotics

First Camera Test at Freeway

Robotics

Test RTIMULib on J120-IMU with Jetson TX2

Environment Jetson TX2 JetPack 3.1 Auvidea J120-IMU J120 firmware (kernel and patches) v1.5
Robotics

Modulate Light Intensity of an LED using PWM on Mbed NXP LPC1768

Environment Host PC: Ubuntu 16.04 Device: mbed NXP LPC1768
Additional LED Blink Test on Mbed NXP LPC1768
Control Motor on Mbed NXP LPC1768
Home
Robotics

Profile

ReyesTatsuru Shiroku
Robotics Engineer
Tokyo, Japan

Details

SNS

Follow Reyes

Popular Posts

  • 高専ロボコンで全国優勝する方法 (アイデア対決・全国高等専門学校ロボットコンテスト)
  • ベンチャーを始めるあなたへ、何度でも挑戦を続けるために。大企業へ転職した私が伝えたいこと。
  • Using I2C LCD on Raspberry Pi
  • 2019年振り返り
  • Donkey Car Setup
  • Install Jupyter Notebook on Jetson TX2
  • Test Design ADAS Camera of Jetson TX2

Archives

  • December 2019
  • June 2019
  • April 2019
  • January 2019
  • October 2018
  • September 2018
  • August 2018
  • July 2018
  • May 2018
  • April 2018
  • March 2018
  • February 2018
  • January 2018
  • October 2017

Category

  • Business
  • Diary
  • EnglishStudy
  • Robotics

Tags

RaspberryPI Mbed Python JetsonTX2 LPC1768 IzanagiDrive 3pi Robot AVR MPU9250 FPGA ZYBOZ7 Vivado OpenCV Flask Ubuntu16.04 J120-IMU CGI CSI Camera Jupyter Notebook Tensorflow I2C LCD Ultrasonic ROS PID DonkeyCar D3.js Epoch MQTT VisualStudio FSM NUCLEO F446RE Momo FreeRTOS PYNQ-Z2 ADC MOSFET Servo Eclipse Polycarbonate LULZBOT TAZ6 3D Printer Fusion 360 Logitech IMU9250 RTIMULib CAN PyCrypto SQLite C++ RobotContest YOLO Record Qt C930e WebRTC
SHIROKU.NET
© 2017 SHIROKU.NET.
    • Profile
  • Home
  • Top

  • Profile

    ReyesTatsuru Shiroku
    Robotics Engineer
    Tokyo, Japan

    Details

    SNS

    Follow Reyes

    Popular Posts

    • 高専ロボコンで全国優勝する方法 (アイデア対決・全国高等専門学校ロボットコンテスト)
    • ベンチャーを始めるあなたへ、何度でも挑戦を続けるために。大企業へ転職した私が伝えたいこと。
    • Using I2C LCD on Raspberry Pi
    • 2019年振り返り
    • Donkey Car Setup
    • Install Jupyter Notebook on Jetson TX2
    • Test Design ADAS Camera of Jetson TX2

    Archives

    • December 2019
    • June 2019
    • April 2019
    • January 2019
    • October 2018
    • September 2018
    • August 2018
    • July 2018
    • May 2018
    • April 2018
    • March 2018
    • February 2018
    • January 2018
    • October 2017

    Category

    • Business
    • Diary
    • EnglishStudy
    • Robotics

    Tags

    RaspberryPI Mbed Python JetsonTX2 LPC1768 IzanagiDrive 3pi Robot AVR MPU9250 FPGA ZYBOZ7 Vivado OpenCV Flask Ubuntu16.04 J120-IMU CGI CSI Camera Jupyter Notebook Tensorflow I2C LCD Ultrasonic ROS PID DonkeyCar D3.js Epoch MQTT VisualStudio FSM NUCLEO F446RE Momo FreeRTOS PYNQ-Z2 ADC MOSFET Servo Eclipse Polycarbonate LULZBOT TAZ6 3D Printer Fusion 360 Logitech IMU9250 RTIMULib CAN PyCrypto SQLite C++ RobotContest YOLO Record Qt C930e WebRTC