Category: Robotics
-
Setup J120-IMU for Jetson TX2
As you know, official JetPack doesn’t support for J120-IMU. In fact, could not use USB port when I attached Jetson TX2 to Auvidea J120-IMU. This post is to install a path of J120 by using JetPack installer. Environment Host PC: Ubuntu 16.04 Jetson TX2 JetPack 3.1 Auvidea J120-IMU J120 firmware (kernel and patches) v1.5
-
Draw Real Time Chart Using Epoch on Raspberry Pi
Environment Ubuntu 16.04 Python 3.6.2 Flask 0.12 D3.js v3.5.17 Epoch 0.8.4 gevent-websocket 0.10.1
-
Draw Real Time Chart Using Epoch
Environment Ubuntu 16.04 Python 3.6.2 Flask 0.12 D3.js v3.5.17 Epoch 0.8.4 gevent-websocket 0.10.1
-
-
-
Flask Server Test on Raspberry Pi for control LED
Environment Raspberry Pi 3B+ Raspbian GNU/Linux 9.4 Python 3 Flask 1.0.2
-
Flask Server Test on Raspberry Pi with FaBo9Axis_MPU9250
Environment Raspberry Pi 3B+ Stratux AHRS Sensor (MPU9250 + BMP280) Raspbian GNU/Linux 9.4 Python 3 Flask 1.0.2
-
CGI Server control Ultrasonic Sensor and I2C LCD on Raspberry Pi
Environment Raspberry Pi 3B+ Raspbian GNU/Linux 9.4 Python 3 HC-SR04 Ultrasonic Module 3.3V-5V Logic Level Converter CYT1076 SunFounder I2C LCD Module Display 16×2
-
Ultrasonic Sensor with I2C LCD on Raspberry Pi
Environment Raspberry Pi 3B+ Raspbian GNU/Linux 9.4 Python 3 HC-SR04 Ultrasonic Module 3.3V-5V Logic Level Converter CYT1076 SunFounder I2C LCD Module Display 16×2
-
Ultrasonic Sensor on Raspberry Pi
Environment Raspberry Pi 3B+ Raspbian GNU/Linux 9.4 Python 3 HC-SR04 Ultrasonic Module 3.3V-5V Logic Level Converter CYT1076